INDUSTRIAL OVEN
(For Baking, Drying, Enameling, Tempering Etc. Safety devices)
Temperature Range: 50C above ambient to 2500C.
Construction: The oven is of triple walled construction with mild steel sheets and sections. A 3″ layer of glass-wool insulation is provided in between the first two walls to minimize heat loss. The oven bottom is suitably reinforced to take up heavy weight.
The interior of the oven is finished with heat resistance aluminum paint while the exterior is of hammer tone grey finish. Adjustable trays will be supplied at extra cost.
The oven has two double walled insulated doors at its vertical have asbestos gasket which will prevent excessive heat loss through front face of the oven.
Heating Element: Heating is accomplished by the aid of strip heaters, made out of imported Nichrome 80 / 20 wire with outer cover made of Stainless Steel sheets for longer life of heaters. The heaters are fixed in between the two interior walls of the vertical sides. Facilities will be provided for easy replacement of heaters.
Air Circulation: This is accomplished by a centrifugal fan driven by a powerful motor, which will circulate uniform temperature inside the chamber.
Temperature Indication: Two Nos. Digital Temperature Indicating Controllers will be mounted on the side to indicate the correct temperature. Auxiliary Controller, which will take charge in case of failure on main controller. Door limit switch to cut off power supply to the heaters while opening the door. Inter-lock arrangement between fan and heaters, thereby heaters will energies only when the fan is “ON”.
Control System: Consists of two nos. Digital Temperature Indicating Controller for automatic temperature control (one no. for main control and the other for auxiliary control) one no. heat control switch, 3 – Nos. ammeter, One No. volt meter with selector switch, indicating lamps, air break magnetic contactor/starter for fan motor, fuses, etc. which will be mounted on a sheet steel cubicle and fitted on to one side of the oven itself.
Power Supply: 400/440 Volts, 50 c/s, three phases, Ac Mains, Four wire system.
|
Model |
Inner Working chamber Size |
Inner chamber |
| H x W x D | ||
| RLIO-1 | 3′ x 2′ x 2′ | Mild steel/Stainless steel |
| RLIO-2 | 3′ x 3′ x 2′ | Mild steel/Stainless steel |
| RLIO-3 | 3′ x 3′ x 3′ | Mild steel/Stainless steel |
| RLIO-4 | 4′ x 4′ x 2′ | Mild steel/Stainless steel |
| RLIO-5 | 4′ x 3′ x 3′ | Mild steel/Stainless steel |
| RLIO-6 | 4′ x 4′ x 3′ | Mild steel/Stainless steel |
| RLIO-7 | 5′ x 4′ x 3′ | Mild steel/Stainless steel |
| RLIO-8 | 4′ x 4′ x 4′ | Mild steel/Stainless steel |
| RLIO-9 | 5′ x 4′ x 4′ | Mild steel/Stainless steel |
| RLIO-10 | 5′ x 5′ x 4′ | Mild steel/Stainless steel |
| RLIO-11 | 5′ x 5′ x 5′ | Mild steel/Stainless steel |
